五月综合激情,日韩一区二区三区精品视频第3页

北陽UST-05LN/05LA光電開關

Product name	Scanning Laser Range Finder
Model	UST-05LN/UST-05LA
Supply voltage	DC 12V/DC 24V (operation range 10 to 30V, ripple within 10%)
Supply current	150mA (DC 24V) or less (during start up about 400mA is necessary.)
Light source	Laser semiconductor (905nm), Laser class 1(IEC60825-1:2007, Accession number:1420210-000)
Detection range and object	60mm to 5000mm (white Kent sheet) 60mm to 2000mm (diffuse reflectance 10% ) Minimum detectable size 130mm (changes according to distance)*1
Accuracy	60mm to 5000mm ±40mm*2
Standard deviation	σ<20mm*2
Scan angle	270°
Scan speed	25msec25ms (motor speed 2400rpm)
Angular resolution	0.5°
Start up time	Within 10 sec (start up time differs if malfunction is detected during start up)
Outputs	Photo-coupler, open collector output Max DC 30V 50mA Output 1: Output 1 OFF during object detection Output 2: Output 2 OFF during object detection Output 3: Output 3 OFF during object detection Malfunction output: ON during normal operation, OFF during malfunction Synchronization output: Synchronization signal during Master/Slave operation. Note: Output 1 to 3 are switched OFF during malfunction state
Inputs	Photo-coupler, common anode, power supply is 4mA when input is ON Input 1 to 5: Area switching inputs (refer Table1) Synchronization input: Input synchronization signal during Slave operation.
Output response time*3	OFF : 66msec to 3241msec ON   : 66msec to 3241msec
Hysteresis	Hysteresis high (6.25%, not less than 60mm) Hysteresis low (3.125%, not less than 30mm) No Hysteresis (Default)
Interface	USB/RS422(UST-05LA only)
LED display	Blue LED: ON during normal operation,  blink during the start up, Orange LED 1: Output 1 ON during object detection Orange LED 2: Output 2 ON during object detection Orange LED 3: Output 3 ON during object detection
Synchronization function	Synchronization Master/Slave operation mode (can set by using Area Designer)*4 Synchronization slave mode (0°) Synchronization slave mode (90°) Synchronization slave mode (180°) Synchronization slave mode (270°)
Surrounding intensity	Less than 15,000lx Note : Avoid direct sunlight or other illumination sources as it may cause sensor malfunction
Ambient temperature humidity	-10°C to +50°C, below 85%RH (without dew, frost)
Storage temperature humidity	-30°C to +70°C, below 85%RH (without dew, frost)
Vibration resistance	10 to 55Hz　double amplitude of 1.5mm for 2hrs in each X, Y, and Z direction 55 to 200Hz 98m / s2 sweep of 2min for 1hr in each X,Y and Z direction
Shock resistance	196m/s2 (20G)　X,Y and Z direction 10 times.
Insulation resistance	10MΩ,　DC 500V
Protective structure	IP65
EMC standards	(EMI) EN61326-1：2013 EN55011：2009 + A1：2010 (EMS) EN61326-1:2013 EN61000-4-2:2009 EN61000-4-3:2006 + A1：2008 + A2：2010 EN61000-4-4:2012 EN61000-4-6:2009 EN61000-4-8:2010
Weight	130g
Material	Front case: Polycarbonate, Rear case: Aluminum
Dimensions (W×D×H)	50×50×70mm

*1. In the case of installing the sensor parallel to the Emitter/Receiver surface. Minimum detectable size of the object can be set by Area Designer.
*2. Under the factory standard testing condition using white Kent sheet.
*3. Initial setting is 66msec. ON/OFF delay function switching is possible by Area Designer. Response time can be further delayed by a maximum of 1scan during the area switching.
*4. Initial setting is synchronization master. When using synchronization operation, refer to section 5.3 for details about synchronization wiring. Synchronization slave setting is possible using Area Designer.

公司簡介：

深圳市創豐儀器儀表有限公司是一家專業從事進口自動化產品代理銷售及系統集成的高新技術商貿企業,位于深圳市寶安寶源路廣福大廈（寶安互聯網基地旁）

主營品牌有:azbil,takex,keyence,omron,sunx,fotek,honeywell,banner,moujen,toho等知名品牌.長期以來，創豐公司以多年的行業經驗、充足的貨源、優惠合理的價格、良好的商業信譽、優 質.快捷的服務、再配合具有國際知名度的品牌，已將所代理的產品廣泛應用在全 國各地的冶金，化工，機械，電子,包裝，數控機床,熱處理,紡織機械,輕工、食品包裝、家電等行業，并贏得廣大用戶的高度信賴與好評,建立起良好長久的合作關系。  
  
深圳市創豐儀器儀表有限公司 

深圳市寶安區寶源路廣福大廈1003